TINY PRINTER PRINTS DIRECTLY ONTO CD AND DVD
Printing CD and DVD labels and then sticking them onto the disc is time consuming and messy. Peeling the sticky label off from the slick backing usually causes the label to curl up making it difficult to handle. And if you're not careful handling it, the label can touch and stick to itself thus rendering it totally useless. Using one of those label presses adds to the messiness since the label usually never lays flat enough on the press so that you can apply the disc's surface onto the curled label. Too many times you'll find yourself with a label that's either off center or creased. You wind up with a disc that looks home-brewed and amateurish. And once the label has been applied, it's almost impossible to remove it so that you can try sticking another label onto the same disc again. Basically you have to toss the disc and burn another one. But there is a better way. Optical discs are now available with printable surfaces. These discs amazingly cost no more than their non-printable counterparts and you can find them most anyplace that sells computer media. Until recently, printers that print directly onto printable discs were a bit pricey. But now there's a brand new disc printer that sells for $139.95 and it's from Primera, the same people that make the Bravo II optical media burner and printer.
 The Signature Z1 is Primera's first low-cost CD and DVD printer that's small enough to easily fit on most any desktop. Using a thermal transfer process, the Signature Z1 prints a 200 dots-per-inch resolution image directly onto a printable disc. Simply open the printer's transparent lid and drop the CD or DVD inside. In about 26 seconds, the Signature Z1 prints a monochrome image including text and graphics directly onto the disc's surface. You can use the included black ribbon or choose from several optional colored ribbons such as red, blue and green.
The included software lets you use any font that's already installed on your computer. You can also use any graphic images and logos. As the Signature Z1 begins its printing process, the disc is automatically rotated so that the images can be printed in any of four different areas on the printable optical media. And the results are very professional looking. After seeing a disk printed using the Signature Z1, you'll toss out your labels and never even think of using a marking pen ever again.
The Signature Z1 connects to your computer via a USB 2.0 connection which also supports the older USB 1.1 standard. A Windows-based computer is required.
If you are looking for a better way to label your optical media discs so that they appear to come from a professional mastering source, then the Signature Z1 is a great way to go. Of course if you are looking for an automated and unattended way to burn and print directly onto a stack of discs all at once and in full color, then the Bravo II still reigns supreme. But it's certainly nice to see that Primera continues to create innovative products that provide solutions to everyday problems. The Signature Z1 fills the gap between the highly automated Bravo II, and trying to label a disc using handwritten marker pens or sticky labels.
www.primera.com |
